These furnaces are suitable for HPDC shops where production rates are required upto 250Kg/Hr for single alloy. These furnaces uses burner flue for melting of solid aluminium which in terms increases furnace efficiency and reduces melting losses.
General performance specs
770KWH/ton at 7200C Tap out temperature
50kg/hr to 250 Kg/Hr
Hydraulically Tilting / Stationary Mechanism
Distinct benefits of Central Melting TYPE Melting cum Holding furnaces
1.Melting and Holding is done in single chamber.
2.Reverses flow pattern of flue gases ensures higher retention of flue in furnace.
3.Higher retention of flue results in lower fuel consumption and very low melting loss.
4.Continuous melting rate ensures better productivity than batch type furnaces.
5.No blind corners in refractory which allows easy and thorough cleaning of furnace
6.Metal tapping is possible through metal tap or Hydraulic tilting system.
7.Additional heat recuperation can be provided as an option.
We are Manufacturers and our setup is situated at Talawade, Pune, ( Maharashtra, India )